B ECOFILTER: Fibrous high-temperature ceramic filter element

Designation:
For purification of gas flows from CO, NOx, SOx, HCL, HF, VOC, dioxins, polydisperse dust particles with temperatures up to 1000°C and concentration of particulate matter up to 20 g/m3.

Applications:
Nuclear industry, ferrous and non-ferrous metallurgy, chemistry and petrochemistry, construction industry, mining industry, fertilizer production, food industry, heating industry, municipal services, etc.

Applications:
Melting and roasting furnaces, drying drums, reactors, furnaces, etc.

Main advantages:
High purification efficiency, low aerodynamic resistance. B ECOFILTER сhemical resistance: to acids (except hydrofluoric acid), saline solutions and organic solvents.

Principle:
Fibrous ceramic filter elements are made of silica fiber. The pore size can vary with the technological mode of production and is selected on the basis of the specific task, based on the dispersion composition of the separated particles, the required aerodynamic resistance and the efficiency of gas purification.

Parameter	Measurement unit	Value
Filtration rating.	μm	≤ 0.3
Substrate porosity.	%	90
Material density.	g/cm 2	0.4
Flexural strength (annular compression).	MPa	≥ 1
Maximum temperature stability.	°C	1000
Filtration of hot gases in an oxidizing medium.	°C	750
Filtration of hot gases in a reducing medium.	°C	600
Filtration rate.	m/min	up to 3

Table of dimensions of ceramic filter elements

Length, mm	1000	2000	3000	4000	5000	6000
Number of sections	1	1	1 or 2	2	2	3
Outer/inner diameter, mm	60/40 150/110		150/110
Type of flange	T	T/V	T/V	T/V	T/V	V
Filtration area, m2	0.18 / 0.47	0.36 / 0.94	1.41	1.89	2.35	2.83
Weight, kg.	0.8 / 2	1.6 / 4	6	8	10	12